Electronic instrumentation

W200 W200 2

W200

WEIGHT INDICATOR
WEIGHT INDICATOR (for weighing and batching) Possible installations: panel, wall Multiprogram: single loading/unloading and multi-product batchings, max 99 formulas Six-digit red LED display, 14 mm height RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol) 3 logic inputs, 5 relay outputs OIML R76:2006 approved, class III, 10000 divis....
View
W100

W100

WEIGHT INDICATOR
WEIGHT INDICATOR Panel mounting Six-digit red LED display, 14 mm height RS232 and RS485 ports (Modbus RTU/Laumas ASCII protocol) 3 logic inputs, 5 relay outputs OIML R76:2006 approved, class III, 10000 divis. 0.2μV/VSI OIML R61 approved - WELMEC Guide 8.8:2011 (M.I.D.)
View
TLB TLB 2

TLB

DIGITAL-ANALOG WEIGHT TRANSMITTER
Weight transmitter/indicator with six-digit red LED display (8 mm height). Space saving compact design. Four buttons for the system calibration. Six indicator led. Dimensions: 25 x 115 x 120 mm. 16-bit Analog output: 0/4-20 mA; 0-5/10 V; В±5/10 V RS485 port (Modbus RTU/Laumas ASCII protocol) 2 logic inputs, 3 relay outputs OIML R76:2006 approved,...
View
TLB4

TLB4

DIGITAL-ANALOG WEIGHT TRANSMITTER
DIGITAL-ANALOG WEIGHT TRANSMITTER ( RS485 ) 4 independent reading channels for load cells (individual load cell monitoring, total weight displaying, digital equalization).   16-bit Analog output: 0/4-20 mA; 0-5/10 V; ±5/10 V RS485 port (Modbus RTU/Laumas ASCII protocol) 2 logic inputs, 3 relay outputs OIML R76:2006 approved, class III, 10000...
View
SB2 Load Cell (25.4 - 45.4t) SB2 Load Cell (25.4 - 45.4t) 2

SB2 Load Cell (25.4 - 45.4t)

LOAD CELLS
Painted steel, hermetically sealed, IP 68/IP69K Cable gland stainless steel Standard cable length: 9.1 m for 45 klb; 10.7 m for 100 klb; 4-wire The shield is floating
View
SB5 Load Cell (510 - 10,197... SB5 Load Cell (510 - 10,197... 2

SB5 Load Cell (510 - 10,197 kg)

LOAD CELLS
Stainless steel, potted, IP67 Cable gland nylon Standard cable length: 3 m; 4.5 m for 50 kN and 100 kN; 4-wire. Other cable lengths on request The shield is floating and can be connected to the load cell body on request
View
SB6 Load Cell (20 - 204 kg) SB6 Load Cell (20 - 204 kg) 2

SB6 Load Cell (20 - 204 kg)

LOAD CELLS
Stainless steel, hermetically sealed, IP68/IP69k Cable gland nylon 3 m standard cable length; 4-wire The shield is floating and can be connected to the load cell body on request
View
SB14 Load Cell (227 - 4,536kg) SB14 Load Cell (227 - 4,536kg) 2

SB14 Load Cell (227 - 4,536kg)

LOAD CELLS
Stainless steel, hermetically sealed, IP68, calibration in lbCable gland nylonStandard cable length: 3 m; 4.5 m for 10 klb; 4-wire. Other cable lengths on requestThe shield is floating and can be connected to load cell body on request
View
SLB Beam Load Cell (91 -... SLB Beam Load Cell (91 -... 2

SLB Beam Load Cell (91 - 2,268kg)

LOAD CELLS
Stainless steel, hermetically sealed, IP68, calibration in lbCable gland nylonStandard cable length: 3 m; 4.5 m for 10 klb; 4-wire. Other cable lengths on requestThe shield is floating and can be connected to load cell body on request
View
UB1 Tension Load Cell... UB1 Tension Load Cell... 2

UB1 Tension Load Cell (1,000 - 10,000kg)

LOAD CELLS
Stainless steel, hermetically sealed, IP68/IP69kCable gland nylon6 m standard cable length; 4-wire. Other cable lengths on requestThe shield is floating and can be connected to the load cell body on request
View
UB6 Tension Load Cell (75 -... UB6 Tension Load Cell (75 -... 2

UB6 Tension Load Cell (75 - 500kg)

LOAD CELLS
Stainless steel, hermetically sealed, IP68/IP69kCable gland nylon6 m standard cable length; 4-wire. Other cable lengths on requestThe shield is floating and can be connected to the load cell body on request
View
PB Planar Beam Load Cell... PB Planar Beam Load Cell... 2

PB Planar Beam Load Cell (3.75 - 375kg)

LOAD CELLS
Aluminium, potted, IP65 Unique very low profile platform sensor 1 m (< 30 kg) / 1.5 m (> 30 kg) standard cable length; AMP-connector #103957-4; 4-wire A special junction box, type KPB-4 is available.
View
PBW Planar Beam Load Cell... PBW Planar Beam Load Cell... 2

PBW Planar Beam Load Cell (12.5 - 240lb)

LOAD CELLS
Aluminium, potted, IP65 Unique very low profile platform sensor 1 m (< 30 kg) / 1.5 m (> 30 kg) standard cable length; AMP-connector #103957-4; 4-wire A special junction box, type KPB-4 is available.
View
PC1 Single Point Load Cell... PC1 Single Point Load Cell... 2

PC1 Single Point Load Cell (7.5 - 200kg)

LOAD CELLS
Stainless steel, IP67 (IP65 for 7.5 kg and 10 kg maximum capacity) Maximum platform size: 7.5 kg...15 kg: 350 x 350 mm 30 kg…75 kg: 450 x 450 mm 100 kg…200 kg: 600 x 600 mm 3 m standard cable length; 4-wire
View
PC6 Single Point Load Cell... PC6 Single Point Load Cell... 2

PC6 Single Point Load Cell (10 - 200kg)

LOAD CELLS
Stainless steel, hermetically sealed, IP68, Cable gland stainless steel, grounded shield Maximum platform size: 10 kg…20 kg: 350 x 350 mm 50 kg: 500 x 500 mm 100 kg…200 kg: 600 x 600 mm 6 m standard cable length, optional 10 m or other cable lengths. The shield is floating or connected to the load cell body.
View
PCB Single Point Load Cell... PCB Single Point Load Cell... 2

PCB Single Point Load Cell (50 - 1,000kg)

LOAD CELLS
Stainless steel, hermetically sealed, IP68/IP69k, Cable gland stainless steel Maximum platform size: 50 kg: 600 x 600 mm 100 kg: 800 x 800 mm 250 kg...1 000 kg: 1 000 x 1 000 mm 6 m standard cable length; 6-wire, other cable lengths on request. *optional: Y = 20 000 for C3 and C3 MI6. For capacities of 250kg or higher Y = 25 000 for C3 and C3 MI6
View
52-02 Rubber Foot

52-02 Rubber Foot

LOAD CELLS MOUNT
Mount for load cells type SB4, SB5, SB6, SB8, SB9, SLB and SB14, including load cell mounting bolts.Standard: galvanized steel
View
52-08 Rocker Pin

52-08 Rocker Pin

LOAD CELLS MOUNT
Mount for load cells type SB4, SB5, SB6, SB8, SB9, SLB and SB14,  rocker pin with 2 o-rings, seal and loading cup.Standard: galvanized steel
View
55-01-07C Rocker System

55-01-07C Rocker System

LOAD CELLS MOUNT
for RC3 load cells 30 t to 50 t, consisting of 2 hardened loading cups with o-ring, clamping plate, 2 clamps, ground cable, 1 set of mounting bolts (with integrated anti-rotation protection) Standard: galvanized steel
View
55-01-07H Rocker System

55-01-07H Rocker System

LOAD CELLS MOUNT
for RC3 load cells 30 t and 40 t, consisting of 2 hardened loading cups with o-ring, 3 excentric disks, ground cable, 1 set of mounting bolts (with integrated anti-rotation protection) Standard: galvanized steel
View
55-01-07D Rocker System

55-01-07D Rocker System

LOAD CELLS MOUNT
for RC3 load cells 7.5 t to 22.5 t, consisting of 2 hardened loading cups with o-ring, 2 clamping plates, 2 clamps, ground cable, 1 set of mounting bolts (with integrated anti-rotation protection) Standard: galvanized steel.
View
53-04 Tension Assembly

53-04 Tension Assembly

LOAD CELLS MOUNT
for ULB, UB1 and UB6 load cells, consisting of 2 spherical rod ends with securing washer and counter nut, 2 yokes with pin and securing washer, as well as ground cable
View
DAS 72.1 Process Indicator

DAS 72.1 Process Indicator

WEIGHT INDICATORS
The DAS 72.1 Mark III process indicator is a fast, accurate, rail mounting instrument for static and dynamic weighing applications. It has a 5-digit LED weight display and service display, serial interface, analogue output and 3 digital inputs and outputs. The digital inputs and outputs are programmable. Communication via serial interface RS422/RS485...
View
FT-10 Weight Indicator

FT-10 Weight Indicator

WEIGHT INDICATORS
Panel mount (52 mm x 96 mm x 100 mm); IP65 front (FT-10 / FT-10P: IP50)With metrological approval (MID)With serial interface RS485 (FT-10: RS232C)Power supply 12…28 V DC (FT-10 AN: 18...28 V DC)
View
FT-107 Weighing Indicator

FT-107 Weighing Indicator

WEIGHT INDICATORS
Rechargeable 2000mAh Li-ion battery. 36 hours of continous useAccuracy class III, 6000 intervals for trade-approved applications25mm wide-angle, backlit LCDsupports up to four load cells.
View
FT-111 Weighing Indicator

FT-111 Weighing Indicator

WEIGHT INDICATORS
W&M approved for 10 000 intervals, LED displayWith real time clock, serial interface RS232 (2x), RS485 and USBType FT-12 additional with EtherNet interface
View
FT-112 Weighing Indicator

FT-112 Weighing Indicator

WEIGHT INDICATORS
W&M approved for 10 000 intervals, LED displayWith real time clock, serial interface RS232 (2x), RS485 and USBType FT-12 additional with EtherNet interface
View
EM100 Load Cell Digitising... EM100 Load Cell Digitising... 2

EM100 Load Cell Digitising Unit

DIGITISING UNITS
High accuracy.With serial interface CANOpen, RS-232, RS-485 up to 1200 samples per second for DC models 6-wire technology, serial interface for direct connection to PC or PLC.
View
IT1 Weighing Indicator IT1 Weighing Indicator 2

IT1 Weighing Indicator

WEIGHT INDICATORS
IT1 is a cost-effective industrial weighing indicator for standard applications. W&M approved. Robust. For industrial scales. Key Features: Robust: Stainless steel housing (ingress protection – IT1: IP69K, IT1 Ex2/22: IP 65), all cables inserted into the housing through tight cable glands W&M approved: For worldwide use as non-automatic weighing...
View
IT2000M Weighing & Batching... IT2000M Weighing & Batching... 2

IT2000M Weighing & Batching module

WEIGHT INDICATORS
IT2000M Weighing & Batching module W&M approved filling controller, MID compliant, for filling of liquid or solid material Beltweigher controller for shipping and receiving of bulk material Process weighing terminal for the capturing and/or controlling the throughput of continuous weighers Batchweighing terminal for automatic filling in a...
View
IT3 Weighing Indicator IT3 Weighing Indicator 2

IT3 Weighing Indicator

WEIGHT INDICATORS
IT3 Weighing Indicator The W&M approved  IT3 weighing indicators are designed for use under harsh environmental conditions (ingress protection IP 69K) and high hygienic standards, such as in the chemical, pharmaceutical or food industry. IT3 weighing terminals have a NTEP type approval and are in line with OIML standards. For installation in hazardous...
View
IT6000E Weight Indicator IT6000E Weight Indicator 2

IT6000E Weight Indicator

WEIGHT INDICATORS
IT6000E series - weight indicators The robust stainless steel housing allows the use in harsh industrial environments. Standard application programs for all typical weighing and batching tasks in various sectors of industry are available. Customer-specific software modifications can be implemented fast and securely by SysTec or by manufacturer of scale...
View
IT8000E Weight Indicators IT8000E Weight Indicators 2

IT8000E Weight Indicators

WEIGHT INDICATORS
IT8000E series - weight indicatorsThe W&M approved IT8000E weight indicator is designed for universal use and is ideal for harsh industrial environments. It is available as a wall-mount/desk-top unit or for panel-mount installation in a control cabinet.A comprehensive range of standard application programs covers all typical weighing and batching...
View
Electronic instrumentation
Product added to wishlist
Product added to compare.